Continuous Temperature Monitoring.Zero Manual Documentation.
Automated temperature monitoring, lot traceability, and compliance documentation so your products stay safe and audits go faster.
The Challenge
The compliance gaps you can't afford
Temperature Excursions Go Unnoticed
Your cold storage hit 45°F at 2 AM. You found out at 7 AM when someone checked the logger. That's 5 hours of potential spoilage.
Recalls Are a Nightmare
Trace lot 4827 through your facility. Which line? Which shift? Which cold storage? Hope you kept those paper logs organized.
Manual HACCP Documentation
Your team spends 2 hours per shift filling out temperature logs, sanitation checklists, and CCP verification forms. By hand.
Auditor Anxiety Is Constant
FDA, SQF, BRC, your customers' auditors. Everyone wants to see your records. Pulling them together takes days of scrambling.
The Difference
Before and after Sandhed
Before
Check temperature logs every 4 hours
With Sandhed
Continuous monitoring with instant alerts
Before
Trace lots through paper records
With Sandhed
Click any product, see complete journey
Before
Fill out HACCP forms by hand
With Sandhed
Automated documentation from sensors
Before
Scramble before audits
With Sandhed
Pull any report in seconds
Solutions Built for Food & Beverage
Explore the specific solutions most relevant to your operations.
Unplanned Downtime Prevention
Most manufacturers discover downtime after it costs them. Sandhed gives you the visibility to catch equipment issues before they shut down production.
View SolutionTemperature Monitoring
A 2-degree drift in a freezer or pasteurizer can destroy product, trigger recalls, and halt production. Sandhed maps live temperature data from Shelly sensors onto your 3D floor plan so you see every cold chain risk the moment it starts.
View SolutionCompliance & Audit Trails
Most facilities piece together audit documentation from spreadsheets, paper logs, and disconnected systems. Sandhed records every action, threshold breach, and maintenance event automatically, so your compliance evidence is ready before anyone asks for it.
View SolutionMaintenance Management
Maintenance teams lose hours tracking down service records, chasing overdue tasks, and figuring out what was done last time. Sandhed puts every work order, service record, and maintenance schedule on your 3D floor plan where you can see it.
View SolutionEnvironmental Monitoring
Humidity creeping up in a cleanroom or pressure dropping in a controlled area can compromise an entire production run. Sandhed puts live environmental data from every sensor onto your 3D floor plan so you catch problems the moment conditions change.
View SolutionAI Operations Assistant
Type a question about your facility and get answers grounded in real sensor data. Sandhed's AI assistant queries your equipment metrics, alerts, and maintenance records to give you plain-language answers instead of dashboards to decipher.
View SolutionWork Order Management
A broken machine gets reported verbally. A work order gets scribbled on paper. No one knows who is handling it or when it will be done. Sandhed gives every work order a location, an owner, and a timeline.
View SolutionHistorical Replay & Incident Investigation
When something goes wrong on the floor, the first question is always 'what happened?' Sandhed's Timemachine lets you scrub back to any moment and see your entire facility exactly as it was.
View SolutionUniversal Integration
Your PLCs, sensors, RTLS tags, and warehouse systems all generate data. Sandhed connects to all of them through a unified pipeline and brings everything onto one floor plan.
View SolutionProven Results
Numbers That Matter to Your P&L
Compliance rate
Less spoilage
Setup time (not months)
Based on platform capabilities and industry benchmarks.
Capabilities
Built for Food & Beverage
Purpose-built features that address your industry's specific challenges.
Continuous Temperature Monitoring
Know the moment a zone drifts out of range. Every temperature reading visualized in 3D with color-coded alerts.
Automated Compliance Documentation
Stop filling out forms by hand. CCP monitoring, sanitation verification, and corrective actions are logged automatically from your sensors.
Lot Traceability
Click any lot and see its complete journey through your facility. From receiving to shipping, every step is recorded.
Sanitation Tracking
Confirm that CIP cycles ran, cleaning schedules were followed, and sanitation is up to standard. All in real time.
Compliance Reporting
Pull audit-ready reports for FDA, SQF, or BRC with a few clicks. No more scrambling before inspections.
Real-World Scenarios
A Day in the Life with Sandhed
Here's what a typical day looks like with Sandhed running.
Catching a freezer drift at 2 AM
“Freezer 3 hits -10°F. Normal is -15°F. Sandhed alerts your night supervisor immediately. Compressor issue identified and fixed by 2:45 AM. Zero product loss. Zero compliance gap.”
Full lot containment in 45 minutes
“Supplier notifies you of contaminated ingredient batch. You click the lot number, Sandhed shows every product that used it, every location it touched, every customer that received it. 45 minutes to full containment.”
Pulling 90 days of records in three clicks
“SQF auditor wants 90 days of cold storage records, CCP verification logs, and sanitation documentation. Three clicks. PDF generated. The auditor has what they need before lunch.”
Integrations
Connects to Your Food Safety Systems
Sandhed connects to your existing systems via industry-standard protocols.
ERP
Temperature
Traceability
Quality
Protocols
Don't see your system? We support 150+ industrial protocols via our gateway integrations.
Success Story
Real Results from Real Operations
“We went from dreading audits to looking forward to them. Our compliance team now spends time on improvement, not documentation.”
Company Type
Frozen Food Manufacturer
Employees
320
Monitoring points
450 sensors
Strong
compliance across audits
Reduced
spoilage incidents
Faster
audit prep time
Related Resources
Why Does My Production Line Keep Stopping?
Most unplanned stops come from a short list of causes that compound each other. Sensor blind spots, delayed maintenance response, equipment running past rated cycles, power quality events, raw material drift, PLC faults, and shift-change errors account for the majority of lost production time. Fixing them requires data correlation, not more dashboards.
Read answerHow to Reduce Equipment Downtime: 8 Strategies Ranked by Impact
Reducing equipment downtime starts with knowing where you're losing time, not with buying technology. The eight strategies below are ranked by how much downtime they typically eliminate in the first year. The top three are organizational fixes that cost almost nothing. The rest require incremental investment but build on each other.
Read answerHow to Improve OEE: The 5 Levers That Actually Move the Number
OEE is the product of availability, performance, and quality. Most plants know their OEE number but can't pinpoint which of the three factors is dragging it down or why. Improving OEE requires decomposing the score, finding hidden losses in each category, and connecting production data to spatial context so you can see where on the floor the problems actually live.
Read answerSee how Sandhed handles food safety compliance
See how Sandhed automates compliance documentation while giving you real-time visibility into every temperature-critical point.
Free pilot available. No credit card required. Cancel anytime.